Professional Switchboard Upgrades & Repairs Sydney | AS/NZS 3000:2018 Compliant

✓ AS/NZS 3000:2018 Compliant

All switchboard upgrades fully comply with Australian Standard AS/NZS 3000:2018 for electrical safety and performance.

✓ Licensed & Experienced

Fully licensed electricians with 25+ years experience in residential, commercial, and industrial switchboard work.

✓ Quality Components

We use premium Schneider Electric, ABB, and Clipsal components for reliability and longevity.

✓ Transparent Pricing

Clear upfront quotes with no hidden fees. You'll know the exact cost before we start work.

✓ Same-Day Service

Fast response for urgent switchboard repairs. Most upgrades completed in one day with minimal disruption.

✓ Lifetime Warranty

All switchboard installations include our lifetime workmanship warranty and full certification.

❌ BEFORE - Outdated & Unsafe

• Old ceramic fuse switchboard
• No RCD safety protection
• Limited circuit capacity
• Fire and shock hazard

✅ AFTER - Modern & Safe

• Modern circuit breaker panel
• RCD safety switches on all circuits
• Increased capacity & circuits
• AS/NZS 3000:2018 compliant

🔥 Fire Risk: Old ceramic fuse switchboards are a leading cause of electrical fires in Australian homes. They lack modern safety features and protection.

⚡ Electric Shock: Without RCD safety switches, occupants were at serious risk of fatal electric shock from any electrical fault or damaged appliance.

📋 Insurance Issues: Many insurance companies now require modern switchboards with safety switches to provide coverage.

🏠 Property Value: An outdated switchboard significantly reduces property value and can prevent sales or rentals.

⚖️ Legal Compliance: NSW regulations require RCD protection on all circuits. This switchboard was not compliant with current safety standards.

🛡️ RCD Protection

All final sub-circuits must be protected by RCD safety switches. This includes socket outlets, lighting circuits, and appliances up to 20A.

⚡ Circuit Protection

Each circuit must have appropriate overcurrent protection (circuit breakers or MCBs) rated correctly for the cable size and load.

📊 Clear Labeling

All circuits must be clearly labeled showing which areas and outlets they control. Essential for safety and maintenance.

🔌 Surge Protection

The 2018 standard recommends surge protection devices (SPDs) to protect sensitive electronics from voltage spikes.

🌐 Earthing System

Proper earthing and bonding must be installed to ensure fault current safely returns to earth, preventing electric shock.

📝 Documentation

Complete electrical safety certification and compliance documentation must be provided upon completion.

1

2

3

4

5

6

Standard Home Upgrade

From $2,500

Single-phase switchboard replacement for typical 2-3 bedroom homes with 8-12 circuits. Includes RCD protection on all circuits.

Large Home Upgrade

From $3,500

Larger switchboard for 4+ bedroom homes with 16-20 circuits. May include sub-boards and three-phase power requirements.

Commercial Upgrade

From $4,500

Three-phase commercial or industrial switchboard with high-capacity circuits and specialized protection requirements.

Emergency Repair

From $1,800

Urgent switchboard repairs for burnt boards, faulty breakers, or dangerous faults. 24/7 emergency callout available.

How much does a switchboard upgrade cost?

Switchboard upgrade costs typically range from $2,500 to $4,500 depending on the size of your home and switchboard requirements. A standard 2-3 bedroom home upgrade starts from $2,500, while larger homes with more circuits cost from $3,500. This includes premium components, full installation, testing, and AS/NZS 3000:2018 compliance certification. We provide free detailed quotes with no hidden costs.

How long does a switchboard upgrade take?

Most residential switchboard upgrades are completed in one day (4-6 hours). Your power will be disconnected during the upgrade, so we coordinate with your electricity provider to minimize downtime. For larger properties or complex installations, we may need two days. Commercial and industrial switchboards can take 1-3 days depending on size and requirements.

Is my old switchboard dangerous?

Yes, old switchboards pose serious safety risks. Ceramic fuse switchboards from before the 1990s are the most dangerous and are a leading cause of electrical fires. They lack modern safety features like RCD protection, meaning you're at risk of fatal electric shock. Even circuit breaker switchboards without RCDs don't provide adequate protection. If your switchboard is more than 20 years old, it should be inspected and likely upgraded immediately.

What is an RCD safety switch?

An RCD (Residual Current Device) is a life-saving safety switch that monitors the flow of electricity through a circuit. If it detects even a tiny current leak (like electricity flowing through a person), it cuts power in milliseconds - fast enough to prevent fatal electric shock. NSW regulations now require RCD protection on all circuits. If your switchboard doesn't have RCDs, you need an upgrade urgently.

Do I need to upgrade my switchboard to sell my house?

While not legally required, an outdated switchboard significantly impacts your ability to sell. Many buyers will request a switchboard upgrade as a condition of sale, or demand a price reduction. Additionally, building and pest inspections will flag non-compliant switchboards, creating negotiation challenges. Some insurers also won't provide coverage without RCD protection. Upgrading before selling avoids these issues and increases property value.

Will my insurance cover switchboard upgrades?

Generally, insurance doesn't cover upgrades unless the switchboard was damaged by an insured event (like a storm or fire). However, many insurers now require modern switchboards with RCD protection for coverage. If you make a claim and your switchboard doesn't meet current standards, your claim may be denied or reduced. Check with your insurer about their requirements.

What is AS/NZS 3000:2018?

AS/NZS 3000:2018 is the Australian/New Zealand Wiring Rules standard that sets mandatory safety requirements for all electrical installations. The 2018 version includes updated requirements for RCD protection, surge protection, and labeling. All switchboard upgrades must comply with this standard. Our installations are fully certified to AS/NZS 3000:2018 and we provide comprehensive compliance documentation.

Can you upgrade my switchboard if it has asbestos?

Yes, but it requires special handling. Many older ceramic fuse switchboards contain asbestos backing boards. We're experienced in safely removing asbestos-containing switchboards following all SafeWork NSW regulations. We engage licensed asbestos removalists when required and ensure complete safety for your family and our team.

What brands of switchboards do you install?

We use premium brands including Schneider Electric, ABB, Clipsal, and HPM. These manufacturers provide the highest quality components with excellent reliability and long warranties. We don't use cheap imported switchboards - only Australian-approved components that meet or exceed AS/NZS standards. All components come with manufacturer warranties plus our lifetime workmanship guarantee.

Do you offer payment plans for switchboard upgrades?

Yes, we understand switchboard upgrades are a significant investment in your home's safety. We offer flexible payment options and can discuss payment plans during your consultation. We also accept all major credit cards and bank transfers. Don't let cost prevent you from upgrading a dangerous switchboard - contact us to discuss affordable payment options.

Call 0404 846 845 Get Free Quote