Security Lighting Sydney | Motion Sensor Lights & Security Light Installation

Motion Sensor Security Lights

Automatic motion-activated security lighting that illuminates when movement is detected. Perfect for entries, driveways, and vulnerable access points.

• PIR motion detection sensors
• Adjustable sensitivity settings
• Customizable timer duration
• 180-degree detection angles

LED Security Floodlights

High-powered LED floodlights for maximum illumination and property protection. Available with or without motion sensors.

• 20W to 150W LED floodlights
• Wide area coverage
• Weatherproof IP65 rated
• 10+ year LED lifespan

Dusk to Dawn Security Lights

Automatic security lighting with photocell sensors that activate at sunset and deactivate at sunrise. Set and forget operation.

• Photocell sensor technology
• Automatic day/night operation
• Perfect for perimeter lighting
• Energy-efficient LED options

Smart Security Lighting

WiFi-enabled security lighting with smartphone control, scheduling, and integration with home automation systems.

• Smartphone app control
• Custom schedules and scenes
• Voice assistant compatible
• Remote activation capability

Perimeter Security Lighting

Comprehensive boundary lighting to illuminate property perimeters, fences, and vulnerable access points around your premises.

• Fence line illumination
• Boundary wall lighting
• Gate and entry lighting
• Side passage protection

Commercial Security Lighting

Professional security lighting for businesses, warehouses, car parks, and commercial properties requiring comprehensive protection.

• Car park security lighting
• Loading dock illumination
• Warehouse perimeter lights
• Multi-zone control systems

🎯 Strategic Positioning

Cover vulnerable areas first:

• Entry points: Front door, back door, side entrances
• Access routes: Driveways, pathways, gates
• Dark areas: Side passages, rear yards
• Windows: Ground floor accessible windows

Proper positioning ensures maximum security coverage while minimizing blind spots.

💡 Brightness Balance

Right amount of light:

• Bright enough to identify visitors
• Not so bright to annoy neighbors
• 20W-30W LED sufficient for most homes
• 50W+ for large commercial areas

We select appropriate wattages based on area size and security requirements.

⏱️ Sensor Settings

Optimize detection and timing:

• Sensitivity: Adjust to avoid false triggers
• Duration: 3-5 minutes typically optimal
• Detection angle: 90-180 degrees coverage
• Range: 8-12 meters standard

Correct sensor calibration prevents nuisance activation from pets or passing traffic.

🏠 Mounting Height

Optimal height for security:

• 2.5-3 meters ideal for most homes
• High enough to prevent tampering
• Angled downward 15-30 degrees
• Avoid direct glare into eyes

Proper mounting ensures effective detection while making fixtures difficult to disable.

🔌 Multi-Zone Control

Independent control zones:

• Front entry lights - separate circuit
• Perimeter lights - own control
• Driveway/garage - independent
• Rear yard - separate activation

Zoning allows targeted lighting activation based on specific security needs.

📹 CCTV Integration

Support camera performance:

• Position lights to illuminate camera view
• Avoid backlighting subjects
• Constant low-level lighting plus motion
• Warm white (3000K) best for cameras

Coordinated lighting ensures clear CCTV footage for identification if needed.

Security Assessment

We survey your property to identify vulnerable areas, entry points, and optimal sensor positions. Discuss your security concerns and requirements.

Custom Lighting Design

Create tailored security lighting plan showing fixture locations, sensor types, wattages, and control zones for optimal protection.

Electrical Wiring

Run weatherproof cables from power source to each fixture location. All outdoor wiring installed in conduit for protection and longevity.

Fixture Installation

Mount all security lights at optimal heights and angles. Secure weatherproof connections and ensure proper sealing against moisture.

Sensor Calibration

Adjust sensitivity, detection range, timer duration, and positioning for each sensor to optimize performance and minimize false triggers.

Testing & Handover

Complete safety testing, RCD verification, demonstrate all functions, provide operation instructions, and ensure your complete satisfaction.

💡 Professional Recommendation

For most residential security lighting Sydney applications, we recommend PIR sensors for their reliability and cost-effectiveness. Dual technology sensors are ideal for areas with false trigger problems like locations with large dogs, near busy roads, or in windy exposed areas. We'll assess your specific conditions and recommend the best sensor technology for each location on your property.

🔦 LED Floodlights

• 20W-150W brightness range
• Wide beam angle (90-120°)
• Wall or ground mounted
• Motion sensor integrated
• Best for: Driveways, yards, car parks

💡 Security Spotlights

• Narrow focused beam (15-45°)
• Adjustable direction
• 10W-30W LED typically
• PIR sensor options
• Best for: Entrances, pathways, gates

🏠 Wall-Mounted Sensors

• Compact design
• 180° detection angle
• Integrated LED lamp
• Weatherproof IP65 rated
• Best for: Entry doors, garages

🎥 Camera-Integrated Lights

• Built-in CCTV camera
• Motion-activated recording
• Smartphone app access
• Two-way audio option
• Best for: Front entries, gates

🌙 Dusk-to-Dawn Wall Lights

• Photocell automatic control
• Always-on overnight
• Energy-efficient LED
• No motion sensor needed
• Best for: Perimeter, boundaries

📱 Smart Security Lights

• WiFi connected
• App control and scheduling
• Activity notifications
• Voice assistant compatible
• Best for: Tech-savvy homes

How much does security lighting Sydney cost?

Security lighting Sydney costs from $320 for a single motion sensor light, $380+ for LED security floodlight, $1,450+ for multi-light security system (4 lights), or $2,800+ for comprehensive property security (8-10 fixtures). Prices include quality weatherproof LED fixtures, motion sensors, RCD protection, electrical wiring, professional installation, sensor calibration, testing, and workmanship warranty. Additional costs apply for long cable runs, difficult access, switchboard upgrades, or smart WiFi fixtures. We provide detailed free quotes after assessing your property and security requirements.

Do security lights need RCD protection in Sydney?

Yes, absolutely. All security lighting Sydney installations must have RCD (Residual Current Device) protection as per AS/NZS 3000 electrical standards. RCDs protect against electric shock by immediately cutting power if electrical fault is detected - critical outdoors where moisture and wet conditions increase shock risk. We install or verify RCD protection on all security lighting Sydney installations. Never bypass RCD protection as it's a legal requirement and potentially life-saving safety device that could prevent electrocution.

What's the best motion sensor for security lighting Sydney?

For most residential security lighting Sydney, PIR (Passive Infrared) sensors are best - reliable, cost-effective, and low false trigger rate. PIR sensors detect heat signatures from people and work well in most conditions. Dual technology sensors (PIR + microwave) are ideal for problem locations with false triggers from large dogs, windy areas, or near busy roads - both sensors must agree before activating. Microwave-only sensors are more sensitive but have higher false trigger rates. We assess your specific property conditions and recommend the optimal sensor technology for each location to ensure reliable security lighting performance.

How do I stop security lights triggering from pets?

To prevent security lighting Sydney false triggers from pets: adjust PIR sensor sensitivity to lower setting (reduces detection of small heat sources), mount sensors higher (2.5-3m) so they look over small animals, angle sensors slightly downward to create pet-immune zone below, use dual technology sensors that require both PIR and microwave detection, or specify pet-immune sensors designed to ignore animals under specific weight (typically 20-25kg). During installation, we calibrate all sensors specifically for your property considering your pets' size and typical movement patterns to minimize nuisance activation.

How long should motion sensor security lights stay on?

For security lighting Sydney, we typically recommend 3-5 minute duration settings - long enough to provide adequate illumination for investigation and movement through area, but not so long as to waste energy or annoy neighbors. Most motion sensors have adjustable timer settings from 10 seconds to 10+ minutes. Shorter durations (1-2 minutes) work for pathways where quick passage occurs. Longer durations (5-10 minutes) suit driveways or areas requiring extended lighting. Settings are easily adjusted after installation during nighttime testing to find optimal balance for your specific security lighting requirements.

Can security lighting Sydney be controlled by smartphone?

Yes, smart security lighting Sydney with WiFi connectivity allows full smartphone control via apps. You can remotely activate/deactivate lights, adjust motion sensor sensitivity and duration, create custom schedules and scenes, receive notifications when lights trigger, and integrate with voice assistants (Alexa, Google Assistant, Siri). Smart security lighting can also integrate with CCTV systems, alarm systems, and whole-home automation. However, smart fixtures cost 50-100% more than standard motion sensors. We can install smart security lighting or retrofit existing installations with smart controls depending on your budget and technology preferences.

What wattage LED security light do I need in Sydney?

For residential security lighting Sydney: 10-20W LED for side passages, pathways, and entrances (replaces 100-150W halogen), 20-30W LED for driveways, garages, and small yards (replaces 200-300W halogen), 50W+ LED for large yards, commercial premises, or car parks (replaces 500W+ halogen). Modern LED security lighting is significantly more powerful per watt than older halogen - a 20W LED provides similar light to 200W halogen. We select appropriate wattages based on area size, ceiling height, required brightness level, and whether it's residential or commercial application. Bigger isn't always better - overlighting creates glare and neighbor complaints.

How high should security lights be mounted in Sydney?

Optimal mounting height for security lighting Sydney is 2.5-3 meters (8-10 feet) for most residential applications. This height provides good PIR detection range (8-12 meters), makes fixtures difficult to tamper with or disable, allows angled downward positioning to reduce glare, and provides wide area coverage. Higher mounting (3-4m) suits two-story buildings or commercial properties. Lower mounting reduces detection range and makes fixtures accessible for tampering. Our electricians assess each location during site survey to determine optimal mounting height considering detection coverage requirements, aesthetics, maintenance access, and security considerations specific to your property.

Do LED security lights work with motion sensors?

Yes, modern LED security lighting is specifically designed for motion sensor use and offers significant advantages over older halogen security lights. LED lights provide instant full brightness when triggered (no warm-up delay), use 80-90% less energy than halogen equivalents, generate minimal heat (no fire risk), last 25,000-50,000 hours (10-20 years), remain cool allowing plastic sensor housings, and work reliably with all PIR, microwave, and dual sensor types. We exclusively install LED security lighting Sydney for energy efficiency, longevity, and superior performance. All quality LED fixtures are compatible with motion sensors and dimmers.

Can security lighting Sydney integrate with CCTV cameras?

Yes, security lighting Sydney integration with CCTV cameras significantly improves night surveillance footage quality. We design coordinated systems where: security lights are positioned to illuminate CCTV camera views, motion sensors trigger both lights and camera recording simultaneously, constant low-level lighting supplements motion activation, warm white (3000K) LED is used for better color rendering on cameras, and lights avoid backlighting subjects which blinds cameras. Some advanced systems feature camera-integrated security lights with built-in WiFi cameras, motion detection, two-way audio, and smartphone app control. We work with your existing CCTV or install complete integrated security lighting and camera systems.